Products
BP drift

BP drifts are designed for wells gauging before installing isolation bridges with the help of blast packers of BP type.

  • BP drifts are made of easily drillable materials: cast iron and aluminum alloys.
  • BP drifts are manufactured both with ball and with shear elements mounting (by the customer’s specification. Specify when ordering).
  • BP drifts are not designed for operation in corrosive environments.
  • Dimensions of the drifts can be made according to the Customer’s technical specifications.

Item structure is shown on Figure 1. BP drift includes a housing, in which the head and the nipple are threaded and secured against turning back. Drift has two cast-iron inserts to protect against abrasion on the borehole wall. Upon the customer’s request the head of drift is made for conjunction with the adapter by means of balls or shear elements. 4 copper shear elements (one copper element shear force is 0,65 t) and 4 steel elements (one steel element shear force is 2,5 t) are included in the delivery set in case of conjunction by shear elements. The number and type of the shear elements to be installed is determined by superintendent of work.

 

BP drifts are designed for wells gauging before installing isolation bridges with the help of blast packers of BP type, made of easily drillable materials: cast iron and aluminum alloys.

BP drifts are manufactured both with ball and with shear elements mounting (by the customer’s specification. Specify when ordering).

BP drifts are not designed for operation in corrosive environments.

TECHNICAL CHARACTERISTICS

Name of tested parameters and characteristics Values
Working medium Non-corrosive gases, well fluid
Mass, kg
BP drift-82 9
BP drift-88 10,5
BP drift-92 12
BP drift-110 15
BP drift-118 19
BP drift-135 25
BP drift-146 30
Dimensions (diameter x length),mm
BP drift-82 82х600
BP drift-88 88х600
BP drift-92 92х600
BP drift-110 110х600
BP drift-118 118х600
BP drift-135 135х600
BP drift-146 146х600